Product structure
Jintai base steel inlaid solid lubricating bearings is alloy tool steel substrate, the surface according to certain Angle and density made from solid lubricant with special formula, this product is a combination of steel wear resistance and self-lubricating properties of solid lubricants, make its in use process need not or less maintenance.The product has high bearing capacity, impact resistance, self-lubricating ability etc., especially suitable for overloading, low-speed, reciprocating or swing, difficult to lubrication and oil film formation.And its working life is longer than ordinary sliding bearing.
![steel inlaid solid self-lubricating bearing](http://dubushings.com/wp-content/uploads/2016/01/all-062701.jpg)
steel inlaid solid self-lubricating bearing
Products are widely used in high load, swing or intermittent movement, etc.If the product can be used in the reciprocating movement of the frequent work of auto mould and guide sleeve.In the support part of the hoisting machinery special adaptation.Example: excavator is supported, crane, etc.But due to the substrate for steel, unfavorable in water or acid and alkali.
Products applied to choose
In the mechanical design, such as the following difficulties, can consider to choose
1, under the condition of low speed and heavy loading, oil lubrication film cannot be maintained;
2, work under the high or low temperatures, or environmental temperature change is larger;
3, work easy occurrence impact load;
4, need frequent starting or under high load starting;
5, maintenance cycle is long, or the high cost of maintenance, bearing work long life;
6, due to the work environment or mechanical structural limitations, difficult for lubricating oil.
The product can provide standard straight sets, flanging shaft sleeve, bearing, thrust washer gasket.Also can according to customers’ special requirements.